DORNIER Tire-cord rapier loom type HTVM/E-200
Width 2000mm, with electronic STAUBLI dobby type 2861/2 year of
construction 2004, 16 levers installed.
Heavy electronic let-off motor for ground- and
upper beam and heavy take-up motor controlled by LENZE devices, Dialog panel 2,
2 mechanical weft mixer (pick/pick),
2 weft accumulators DORNIER type CHRONO X2-M (CANBUS), GROB warp motion with 3 detection bars,
8 heald frames 13” C, 1 tension roll diam. 140 mm with spring right and left side, 2 pressure rolls, mechanical
waste cutter RHS & LHS, standard temples, left and right rigid grippers,
1 cloth roller, Warp beam diameter 800mm,
motorized upper beam construction, but without upper guiding roll and upper warp gear.
Including Tire cord frame, maximum nominal width 200cm. With walking floor / pneumatic
Festo driving system with heavy Festo pneumatic pistons RHS&LHS with following functions 1.
Cylinders downwards / 2. Compensator / 3. Cylinders upwards; working air pressure 6 bar/ fixation profile for reed / warp detection Grob with 5 detection bars / guiding rolls (max.
218cm) / walking floor. Dimensions mounted construction Tire cord frame : 261cm x 258cm x 125cm
